Backyard Aquaponics
A place to discuss aquaponics

Hi all.
I'm very new to aquaponics but have been doing a lot of reading online and exploring various websites over the past couple of weeks.
I'm still checking systems, options and costs.
I see there a lots of people from the Perth area here and I hope to pick up on a lot of tips from as many members as I can.

Thanks in advance

Welcome to the forum Stanno . The IBC of Aquaponics is a good source of information if you haven't seen it yet, there's a link in the upper right corner of the page or this will get you to the page as well - http://ibcofaquaponics.com/.

Cheers

Thanks Scotty.
Downloaded the PDF a couple of days ago and am slowly working my way through it.
Also downloaded Google sketch as some plans are linked to the program.
Unfortunately the links dont work.
404: Page Not Found

The web address that you are trying to access is no longer available. This issue is likely due to a link that points to the old 3D Warehouse.

Please update old links or bookmarks to point directly to the new 3D Warehouse.

Still, I can play with google sketch to my hearts content.

I'll pass the word along and see if they can fix the links.

Stanno,

I noticed the same thing with the 3D SketchIUp models using the links in The IBC of
Aquaponics. You can follow the link in the error message to the new 3D Warehouse
for SketchUp models and then search for "aquaponics" to find a bunch of nice models.

There is a nice collection by Backyard Aquaponics which I think contains all the models
mentioned in the IBC of Aquaponics book:

https://3dwarehouse.sketchup.com/collection.html?id=52cff8c467e19dff22e1f336c2388f52

Or search for "Backyard Aquaponics" to get those and a few extras... If you search for
collections, this should find them as well:

https://3dwarehouse.sketchup.com/search.html?q=Backyard+Aquaponics&backendClass=collection

Good luck!

--
Sam

Welcome Stanno.
More and more people from Perth are getting into AP it seems, great.

Yeah, go with Sam's links... Sketchup was sold and all the links changed, I don't see a lot of point in updating the pdf just for the model links, chances are they may change again...

Thanks for the info guys, I'll go have a play.