⚠️ This forum has been restored as a read-only archive so the knowledge shared by the community over many years remains available. New registrations and posting are disabled.

All times are UTC + 8 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Starting my AP Proyect
PostPosted: May 28th, '15, 00:44 

Joined: May 23rd, '15, 00:01
Posts: 9
Gender: Male
Are you human?: As much as I can...
Location: Spain, Madrid
Hi guys,
Well I´m starting now to built my AP system, and I´m so excited. Not pretty much to say, just thanks to this forum and all their members, cause without it I´m sure that Ihave never started this. I also want to apologise if I say something wrong, cause i have to improve my english. Correct me or ask me if you don´t understand something, please.
The last day i started to writte this, but a problem with my PC maked me lost what i wrote :upset: . So i will sump up it.
Basically I start looking for a solution to easy and controlable growing of lettuce and other veggies, like cucumber and peppers. I find some ways to do it, but that what i was going to made was hidroponics. After searching more information about it a found aquaponics like 2-3 months ago, and now I have almost everything to start it. That and a lot of work to do.

I also have some desing for my Ap system, but I cant upload the files to show you how, so if you could help me any help is welcome. That it what appear when I tried to upload:
"The image must be at least 0 pixels wide, 0 pixels high and at most 900 pixels wide and 900 pixels high. The submitted image is 9924 pixels wide and 7056 pixels high." Any Idea to solve it? I tried even with photoshop.

Well once I will show you how I tell you more about it.


Top
 Profile  
Reply with quote  
    Advertisement
 
PostPosted: May 28th, '15, 10:49 
Legend Member
Legend Member

Joined: Jan 9th, '13, 22:59
Posts: 520
Gender: Male
Are you human?: YES
Location: Malaysia
@flow_pow - Hi and welcome to the forum


Top
 Profile  
Reply with quote  
PostPosted: May 28th, '15, 19:35 
Newbie
Newbie

Joined: May 26th, '15, 09:28
Posts: 25
Gender: Male
Are you human?: yes
Location: NSW, Australia
If you open pictures in paint, the free program that comes with windows, there is a menu option to resize, click that and select what percentage you need to reduce it down so it will upload, I did mine at 45%, then save it as a separate file and upload it using the post reply button, welcome to the forum!


Top
 Profile  
Reply with quote  
PostPosted: May 29th, '15, 03:01 

Joined: May 23rd, '15, 00:01
Posts: 9
Gender: Male
Are you human?: As much as I can...
Location: Spain, Madrid
thank you very much, you answerer so fast.
I found that i had a program that do it installed, so let see if it works properly.
Attachment:
File comment: Fish tank location
1.jpg
1.jpg [ 226.93 KiB | Viewed 1532 times ]


Fine, I think id done.
Well first i must comment that i live in a "continental" wheather, which basically means hard temperatures ( very cold winters and very warm summer) so I´m going to build a greenhouse to secure that I had enought temperature, and if I see that it is to much sun during this sumer maybe i willl use a shadecloth. That was the easiest problem to solve, then I should see what fish could I use, because rainbow trout (an option for the very cold winters) I don´t know if resist in summer, and also Tilapia happens that can´t be grown here in winter without heat the water (I hadn´t money enought to mantain this). I also want that it was the cheaper as posible, so I search for recicled material like the IBC, and maybe a few recicled raingutter and some PVC that i have to buy.
Well the schema is quite simply. I had and space of 6x6 meters (sorry about the metric units, but its hard to use imperial) tha maybe i could expand to that: "A" to 7 or 8 meters, and "L" up to 10. I think that it is a good start.
Is on sacle, so it was the better way to have it clear. I let space for access to all the system.

The next shows how the NFT channels are located.
Attachment:
File comment: NFT channels
2.jpg
2.jpg [ 330.77 KiB | Viewed 1532 times ]


And together:
Attachment:
File comment: Both together.
3.jpg
3.jpg [ 332.12 KiB | Viewed 1532 times ]


Well I´m going to bury the Fish tanks, and made a support for the gutters (to hip height), that also allows me to access to the tank ( maybe above the thanks it can be mobile), so I think that I have the space neccessary to work.
Well, the first issues that I have to solve are those:

1. Ratio fish- plants; with the NFC is a ratio of 20 plants/square meter, and in what I plan makes 20.25 square meters= 405 plants. And fish that I can stoke is aproximately 50 per tank, so: 405 plants/ 250 fish is a good rate? I can also put some more plant or fish.

2. Filtration Media; I really don´t know what to do; but I know where i put it. I was thinking to made it with half an IBC with expanden clay full of red worms. I want the maxim recycling of the matter and that is a good way to break solid waste of the fish.

3. Hardware stuff (pumps and other); I want use the less as posible and also any idea of how to do it. I want to have al the tank fish conected but the fish in each tank separated, But how I remove all the waste to secure that there not will be amonia problems (it includes fish undetected death)

I Know that its to much to read, so excuse me. I spect that you could help me. Any information or links ar welcome.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 8 hours


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Powered by phpBB® Forum Software © phpBB Group
Portal by phpBB3 Portal © phpBB Türkiye
[ Time : 0.217s | 16 Queries | GZIP : Off ]