Backyard Aquaponics
A place to discuss aquaponics

Evidently images on my computer also exceed the maximum 2 MB size even if zipped I will try to see if there is any way to make it small enough

I managed to make my pictures a smaller file size and attached them One is of the entire schematic hand-drawn (I will make a schematic on the computer as soon as possible); one is of the right side because it is difficult to see clearly in the picture of the entire thing; one is of the left side. I also attached an image of the circuit on the breadboard I built.

Here is a picture of the circuit for the demand feeder put on a breadboard. I would be happy to clarify what any of the parts are

Did you have it working with a motor and the feeder part when you did your demo?

I had the motor and feeder part working, and the circuit working with the MOSEF circuit that would be connected to the motor included but did not attach the motor to the circuit for the demo in case something went wrong and it burned out the circuit. Now that exams are over with, I want to make sure that the motor/feeder and circuit connect correctly

even though this is oven my head (currently) i have to say it seam like a very good idea.

tigger03, did you ever find the revised software we worked on together over skype?

If so can you please post it here.

Thanks in advance.