⚠️ This forum has been restored as a read-only archive so the knowledge shared by the community over many years remains available. New registrations and posting are disabled.

All times are UTC + 8 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Mar 9th, '12, 16:40 

Joined: Mar 9th, '12, 15:33
Posts: 8
Gender: Male
Are you human?: YES
Location: New Zealand, South Island
Hi All,

Big thanks to everyone on this forum and others and GrowPower.

After much procrastinating for a year.

Here's my first go at aquaponics.

Bits
Attachment:
10022012131(1).jpg
10022012131(1).jpg [ 44.74 KiB | Viewed 1917 times ]


Stand
Attachment:
10022012139(1).jpg
10022012139(1).jpg [ 47.25 KiB | Viewed 1917 times ]


Notice the tomato plant in the ground to the right (it died)
To the left of it is a pepper and another tomato to the left of that.

Please note I'm not a gardener, never raised fish before.

I have killed a lot of plants though thru lack of watering.

Let the journey begin and lots of laughs.


Top
 Profile  
Reply with quote  
    Advertisement
 
PostPosted: Mar 9th, '12, 17:32 

Joined: Mar 9th, '12, 15:33
Posts: 8
Gender: Male
Are you human?: YES
Location: New Zealand, South Island
Here's more pics

Note to self - first plants went in on the 13th feb 2012
(These were a replanted tomato and pepper)

Ok here we go
Bell Siphon Testing - there is a lot more to these things than meet the eye. (books could be written about these things)
A few things I've found out
A bloke called Affnan is worth looking up.
Just because a cap looks air tight doesn't mean it is, I used plumbing tape (white stuff) in the end as this meant I could still do more experiments.
I found breaking the syphon the most difficult.
My latest trick was to put a pin prick hole in the top (I'll let you know how that goes).
Overall they're a fantastic thing to experiment with, I wish my science classes had them.



Attachment:
File comment: Bell Siphone
13022012146(1).jpg
13022012146(1).jpg [ 35.69 KiB | Viewed 1905 times ]


Ok these are the first plants Pepper on left and the other a tomato (both taken from soil).
I washed the soil off.
Drilled a hole in the bottom of the plastic pot.
Then used rock wool to keep them mounted.

Added hydroton. (not sure about hydroton, it binds just like gravel, so next time will use river stone 20mm)

Chives and parsley from garden place, used high pressure to wash off soil they came in.

I split each chunk into thirds this was ok for the chives but the outer roots of the parsley didn't appreciate this and died off but the inner ones are still lively, could of been the breaking of the root system to get them apart.


Attachment:
13022012144(1).jpg
13022012144(1).jpg [ 40.92 KiB | Viewed 1905 times ]


Attachments:
18022012156(1).jpg
18022012156(1).jpg [ 51.79 KiB | Viewed 1905 times ]
Top
 Profile  
Reply with quote  
PostPosted: Mar 9th, '12, 17:55 
Bordering on Legend
Bordering on Legend

Joined: Feb 9th, '12, 21:55
Posts: 261
Images: 0
Gender: Male
Are you human?: yes
Location: Italia
I'm really liking the wooden stand, congratulations on you whole system.
Plenty of room for future expansion too! :cheers:


Top
 Profile Personal album  
Reply with quote  
PostPosted: Mar 9th, '12, 18:10 

Joined: Mar 9th, '12, 15:33
Posts: 8
Gender: Male
Are you human?: YES
Location: New Zealand, South Island
Added a sump tank as the levels in the fish tank went up and down alot.

Most probably due to the hydroton needing time to soak up the water.

The sump tank at the bottom is also feed via a syphon - a different type though.

This also gave me some head aches.

The fix was a plumbing tape to make sure the joints were air tight.

A little air hole is in the fish tank side to keep it at a constant level.

Attachment:
20022012162.jpg
20022012162.jpg [ 48.41 KiB | Viewed 1896 times ]


About 3 weeks in.

I added a thing called a biological filtration booster about 2 weeks back when I added two gold fish.

Not sure whether it worked or not (I still wonder how bacteria needing oxygen can live in a bottle?)

Anyways, lots of testing of pH and ammonia.

Ph was 8.2 tapwater. Added some pH down (hydrochloric acid) over a few days (so not to stress things) got it down to 6.6 and then it rained which brought it back up to 7.6. So added 20ml over two days this has brought back down to 6.6 until it rains again.

The leaves were turning yellow on the lettuce, tomato and the pepper so I've added 5 mg of chelated iron and it seems to turn them around.

Also I've been spraying them with Seasol (concentrated seaweed) 4ml to 1L.

I now have about a dozen gold fish and feeding them breakfast, morning tea, lunch, afternoon tea and dinner.

Ammonia has never gone above .25ppm.
Nitrites and Nitrates are 0ppm

The plants I washed the roots of are all white and the roots are growing like mad.

The tomato, pepper and rosemary are growing new white root into the water.

Recap
Plants
tomato (sortof ok), pepper (good), celery (really good), lettuce (okish, raft a bit yellow), brockley (ok), chives (good), parsley (center ones are good), cabbage (ok), bok choi (really good).

Fish (dozen about 1.5 to 2.5 inches)
All still alive (really good)
One jumped but solved that with netting (and it lived, not sure about brain damage).

Light blue container contains the aerator (noisy beast) within another container with rubber feet, quietens it down by half.

Attachment:
05032012168.jpg
05032012168.jpg [ 45.54 KiB | Viewed 1896 times ]


Top
 Profile  
Reply with quote  
PostPosted: Mar 9th, '12, 21:08 
Welcome Woolly... good to see a few people across the ditch giving aquaponics a try...


Top
  
Reply with quote  
PostPosted: Mar 12th, '12, 21:46 
Bordering on Legend
Bordering on Legend
User avatar

Joined: Nov 27th, '08, 01:39
Posts: 470
Images: 0
Gender: Male
Are you human?: YES
Location: South Texas USA
WoollyNZ wrote:
...
Ok here we go
Bell Siphon Testing - there is a lot more to these things than meet the eye. (books could be written about these things)
A few things I've found out
A bloke called Affnan is worth looking up.
Just because a cap looks air tight doesn't mean it is, I used plumbing tape (white stuff) in the end as this meant I could still do more experiments.
I found breaking the syphon the most difficult.
My latest trick was to put a pin prick hole in the top (I'll let you know how that goes).
Overall they're a fantastic thing to experiment with, I wish my science classes had them....


Bell siphons are just elaborate funny shaped loop siphons. Your system looks like it's getting off to a good start!


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 8 hours


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Powered by phpBB® Forum Software © phpBB Group
Portal by phpBB3 Portal © phpBB Türkiye
[ Time : 0.146s | 16 Queries | GZIP : Off ]