Michaelshewitt's systems

michaelshewitt

It works! *evil scientist laugh*

Ammonia near-as-dammit 0ppm
Nitrite 0ppm
Nitrate 20ppm

If only the pH wasn't 8.2...

Attachment:

Water test.jpg [ 89.65 KiB | Viewed 2052 times ]

Simo

Just thought I would warn you, someone on the ALS forum is posting pictures of your AP system and claiming all the work for themselves :-P

michaelshewitt

Simo wrote:

Just thought I would warn you, someone on the ALS forum is posting pictures of your AP system and claiming all the work for themselves :-P

What is the ALS forum?

michaelshewitt

Simo wrote:

Just thought I would warn you, someone on the ALS forum is posting pictures of your AP system and claiming all the work for themselves :-P

Oop. I get it. Too many home-brews. :oops:

freoboy

michaelshewitt wrote:

Simo wrote:

Just thought I would warn you, someone on the ALS forum is posting pictures of your AP system and claiming all the work for themselves :-P

What is the ALS forum?

Simo

Aussies living simply

http://www.aussieslivingsimply.com.au/

RupertofOZ

Simo... I think "redhen" is Kathy... Michaels partner.... this kind of gives it away... :wink:

Quote:

My bf is taking care of the technical stuff, i'm just a labourer. He's got a thread at byap where he goes into a lot of detail about just about everything.

michaelshewitt

Got a bit more work done today - the last two sumps went in.

I really should have done all four sumps at once, but I've built this as the bits have come to hand.

So I had to pump all of the water out of the existing sumps and hold it in the fishtank and growbeds, whilst I split the waste plumbing and incorporated the new sumps:

Attachment:

Sump 2.jpg [ 137.21 KiB | Viewed 1900 times ]

Attachment:

Sump 3.jpg [ 120.65 KiB | Viewed 1897 times ]

All done now, and I just need to fine-tune the water level tomorrow.

And I managed to buy growbed 3 today - a corner bath, rather than a spa, so I don't have all the jets to worry about. It's near Penrith, so a bit of a drive awaits.

But... the fibreglass roofing sheets I have bought are also in Penrith, so I just need to work out how to get 30 3600 sheets of Alsynite and a corner bath on my ute at the same time...

Decal

Hi,
Looking at the photos above I noticed some chips in the enamel, you might want to pacth them up 1st before adding water?

I have ready on a few threads the metal underneath isn't good for fish?

Great work on the system though just went back through your thread and it's looking fantastic!! :headbang:

michaelshewitt

Decal wrote:

Hi,
Looking at the photos above I noticed some chips in the enamel, you might want to pacth them up 1st before adding water?

I have ready on a few threads the metal underneath isn't good for fish?

Great work on the system though just went back through your thread and it's looking fantastic!! :headbang:

Yes, well spotted. I have given those areas a skim of silicon.

michaelshewitt

Had a series of wins on eBay - two corner baths and enough fibreglass roof sheeting to reroof the shed. Best of all, all three were about 5km of each other. Not so good was that that 5km triangle was about 120km from me...

You can get a fair bit on a Hilux if you have enough ratchet straps. If it wasn't for the kids I'd have a single-cab and a much bigger tray. I'll get my own back when they're big enough to wield a shovel.

Attachment:

Shopping trip.jpg [ 174.08 KiB | Viewed 1763 times ]

So, this weekend - growbeds 3 and 4 go in. Maybe a start on replacing the roof.

mantis

Kewl

michaelshewitt

So things are growing:

Attachment:

Broccoli.jpg [ 134.25 KiB | Viewed 1712 times ]

Attachment:

Peas.jpg [ 172.91 KiB | Viewed 1713 times ]

My headlights are pointing at the sky:

Attachment:

A tonne of bluemetal.jpg [ 149.91 KiB | Viewed 1712 times ]

We've ordered some fishies.

Kathy's got a tonne of grow media washing to do...

But, most exciting of all, I've got a line on two more fishtanks! Watch this space...