Backyard Aquaponics
http://byap.backyardmagazines.com/forum/

refractometer reading
http://byap.backyardmagazines.com/forum/viewtopic.php?f=8&t=9810
Page 1 of 1

Author:  lgregory [ Jun 3rd, '11, 09:38 ]
Post subject:  refractometer reading

Help.... I need some advice please. I have just bought a new refractometer to check the salt and it says it goes to 10%, however on the calibration screen it says, 0 - 100 % on one side and 1.000 - 1.070 on the d 20/20 side.

it is a RFS 10/ATC

I assume the 1 - 100 % side means 10% tops, but I want to be sure. I don't want to add too much salt.

RIght now my reading is .6 on the % side. or 1.06 on the 20/20 side.

I have a 100 lt tank but it is not completely full so I think I want to get it to 1ppt?
Thanks,

Linda

Author:  freoboy [ Jun 3rd, '11, 09:42 ]
Post subject:  refractometer reading

The bumbers on the right I think will be ppt, not percent, which is parts per hundred. Get it till it reads 1 and that will be ppt

Author:  Charlie [ Jun 3rd, '11, 16:55 ]
Post subject:  Re: refractometer reading

Yea as FB said, every increment is 1 ppt on that scale, check my thread on salting.

Author:  RupertofOZ [ Jun 3rd, '11, 21:09 ]
Post subject:  Re: refractometer reading

Or work it out... 1ppt... is 1kg of salt/1000L...

So a 100L tank would require 100gms of salt....

Author:  faye [ Jun 3rd, '11, 22:24 ]
Post subject:  Re: refractometer reading

I think Linda has a 1000 litre tank! So that would be 1 kg salt to 1000 litres. 1ppt

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/