Backyard Aquaponics
http://byap.backyardmagazines.com/forum/

IBC Repairs
http://byap.backyardmagazines.com/forum/viewtopic.php?f=8&t=28800
Page 1 of 1

Author:  Greasy [ Jun 30th, '17, 07:40 ]
Post subject:  IBC Repairs

One of my ibc's has a crack in the corner probably about 100mm long and I want to repair it rather than throw it out. Wondering if anyone has repaired an ibc before and what they used. I don't want it to be too expensive as the ibc didn't cost me much. Any and all help appreciated.

Author:  boss [ Jun 30th, '17, 11:23 ]
Post subject:  Re: IBC Repairs

I've glued quite a few different plastics, HDPE is one of the most difficult because of its waxy consistency. The real bummer is if it has one crack it may have sat in the direct sun expediting plastic breakdown. To find out press in on the plastic in several places listening for cracks.

Author:  Greasy [ Jun 30th, '17, 12:26 ]
Post subject:  Re: IBC Repairs

*presses down on the plastic*
Oh look! Now I have two cracks :upset:

Author:  Food&Fish [ Jun 30th, '17, 16:33 ]
Post subject:  Re: IBC Repairs

If its got 1 crack its stuffed cut your losses and get another

Author:  Tonzz [ Jun 30th, '17, 17:23 ]
Post subject:  Re: IBC Repairs

Gumtree....type IBC

dont touch the $30 ones at Freeling, he is not willing to say what chemicals they had in them

Author:  Greasy [ Jun 30th, '17, 20:32 ]
Post subject:  Re: IBC Repairs

Tonzz wrote:
Gumtree....type IBC

dont touch the $30 ones at Freeling, he is not willing to say what chemicals they had in them


Yep I know! Been in contact with him myself and got the same response!

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/