Backyard Aquaponics
http://byap.backyardmagazines.com/forum/

water tank liner manufacturers in au
http://byap.backyardmagazines.com/forum/viewtopic.php?f=8&t=25731		 Page 1 of 1
Author:  rossco_argus [ Aug 11th, '15, 18:21 ]
Post subject:  water tank liner manufacturers in au
I recently purchased a number of 1000l flat pack round water tanks on special, these had a ldpe liner already in them similar to a square goon bag in design, what i am chasing is a supplier of hdpe or other suitable material custom liners as i am unable to find a suitable adhesive for the liners available any suggestions would be appreciated
Author:  rossco_argus [ Aug 28th, '15, 20:12 ]
Post subject:  Re: water tank liner manufacturers in au
[img][IMG]http://i916.photobucket.com/albums/ad3/Rock_2_Reef_Services/2015-08-09%2013.10.08.jpg[/img][ /img]
After contacting every supplier in Brisbane only one returned my emails and quoted $240 with underlay and fittings + gst and freight, seems a good price, and i was impressed with their rapid response and volume of info supplied. Has anyone ever dealt with fabric solutions
Author:  jet [ Aug 31st, '15, 13:06 ]
Post subject:  Re: water tank liner manufacturers in au
Yes I have dealt with them and they are good people
Author:  BuiDoi [ Aug 31st, '15, 15:38 ]
Post subject:  Re: water tank liner manufacturers in au
..
What do you need "" a suitable adhesive for the liners"" for.. :dontknow:

Is the liner not in the form of a snug-fit bladder, and so your only task under AP is the provide outlets through the tank wall..

This could be done without real adhesive.. by clamping with seals etc..

I was told of that "Special" but they were not as generous down here.. :support: :-)
..
.

BTW - LDPE - effectively, swimming pool liner??? so there are supposed to be pool glues

PS - $240 for a replacement liner, makes for an expensive tank..
I would be looking at GumTree for old water tanks and use the flat packs as GB's
..
.
Author:  Sleepe [ Aug 31st, '15, 16:06 ]
Post subject:  Re: water tank liner manufacturers in au
Most swimming pool liners are vinyl. :)
Author:  BuiDoi [ Aug 31st, '15, 16:20 ]
Post subject:  Re: water tank liner manufacturers in au
Sleepe wrote:
Most swimming pool liners are vinyl. :)


:oops: and yes you are right - Sorry Rosco
..
.
Author:  rossco_argus [ Aug 31st, '15, 21:59 ]
Post subject:  Re: water tank liner manufacturers in au
The liners from fabric solutions are welded reinforced polypropylene with a 20 year life span, the chance i could fabricate a guaranteed leak proof flat round to cylinder join would be very unlikely. The main advantage i saw with the poly flat packs was the small boxed footprint so i can keep a few aside for later expansion without irritating the boss that the yard is full of empty ibcs.
Author:  BuiDoi [ Sep 1st, '15, 06:55 ]
Post subject:  Re: water tank liner manufacturers in au
..
But why the need for a new liner.. don't they come with one already..
..
.
Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/