Backyard Aquaponics
http://byap.backyardmagazines.com/forum/

IBC contents question
http://byap.backyardmagazines.com/forum/viewtopic.php?f=8&t=23830
Page 1 of 1

Author:  Drew C [ Dec 23rd, '14, 02:10 ]
Post subject:  IBC contents question

Would you guys be weary of "water based adhesive" as the previous contents for an AP system? That is all the information that I am able to get.

Author:  BuiDoi [ Dec 23rd, '14, 03:34 ]
Post subject:  Re: IBC contents question

..
Was there any left overs ..?

Was it a very white glue.. just thinking of PVA, but there could be many others..

My main thought would be that being water based, it should be easily cleaned out... I would give it a go...
..
.

Author:  scotty435 [ Dec 23rd, '14, 03:45 ]
Post subject:  Re: IBC contents question

I'd probably keep looking. I suspect once the containers clean it would be safe but I can't say for sure. Here's an example of a water based adhesive Materials Safety Data Sheet (MSDS) - http://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmx_voxmGOv70k17zHvu9lxtD7SSSSSS--

Author:  Drew C [ Dec 23rd, '14, 03:59 ]
Post subject:  Re: IBC contents question

scotty435 wrote:
I'd probably keep looking. I suspect once the containers clean it would be safe but I can't say for sure. Here's an example of a water based adhesive Materials Safety Data Sheet (MSDS) - http://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmx_voxmGOv70k17zHvu9lxtD7SSSSSS--


thanks for finding that for me, but it might as well be written in Chinese :think: . Do you see something in particular in the data sheet that is a cause for concern?

Author:  BuiDoi [ Dec 23rd, '14, 04:59 ]
Post subject:  Re: IBC contents question

..
Were it PVA, then I would accept them, being confident that I could soften and remove all remains and gernie off the remains...
..
.

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/