Thanks Rupert!
Also when will silvers be available?
| Backyard Aquaponics http://byap.backyardmagazines.com/forum/ |
|
| Uniseal Vendors http://byap.backyardmagazines.com/forum/viewtopic.php?f=8&t=13627 |
Page 1 of 1 |
| Author: | Zman [ Sep 11th, '12, 10:56 ] |
| Post subject: | Uniseal Vendors |
Hey guys, I used to buy uniseals from a guy but he doesnt seem to be answering his emails now. Does anyone have a new place to buy the uniseals at all? I need to buy some 50mm pressure pipe uniseal urgently. Cheers |
|
| Author: | RupertofOZ [ Sep 11th, '12, 10:57 ] |
| Post subject: | Re: Uniseal Vendors |
Try www.uniseals.com.au The website is "down"... but the contact numbers are there... |
|
| Author: | Zman [ Sep 11th, '12, 11:20 ] |
| Post subject: | Re: Uniseal Vendors |
Thanks Rupert! Also when will silvers be available?
|
|
| Author: | RupertofOZ [ Sep 11th, '12, 11:25 ] |
| Post subject: | Re: Uniseal Vendors |
Now, if you want them... (70-100mm).... email me... |
|
| Author: | arbe [ Sep 11th, '12, 11:51 ] |
| Post subject: | Re: Uniseal Vendors |
Zman - is that the guy I put you onto? |
|
| Author: | Amph [ Sep 11th, '12, 17:05 ] |
| Post subject: | Re: Uniseal Vendors |
Earthangroup has/sells them also.. |
|
| Author: | Zman [ Sep 11th, '12, 18:21 ] |
| Post subject: | Re: Uniseal Vendors |
arbe wrote: Zman - is that the guy I put you onto? Yeah mate. Ben stopped responding to his emails. |
|
| Author: | chainsaw [ Sep 12th, '12, 05:58 ] |
| Post subject: | Re: Uniseal Vendors |
All the info you need about Uniseals, is posted on the BYAP Forum here........... viewtopic.php?f=11&t=13288 |
|
| Author: | Zman [ Sep 12th, '12, 11:30 ] |
| Post subject: | Re: Uniseal Vendors |
I actually called them today arbe and it seems like ben has been flat out so havent had a chance to get back to me. Freshbydesign are actually a lot cheaper than uniseal.com.au |
|
| Author: | arbe [ Sep 12th, '12, 12:11 ] |
| Post subject: | Re: Uniseal Vendors |
Excellent news zman as I need to order some more. |
|
| Author: | SnowT [ Sep 12th, '12, 14:34 ] |
| Post subject: | Re: Uniseal Vendors |
Heya Very important fact with uniseal's.. Make sure that the pipe going thru the uniseal is not under any sideways/up/down force at all... If you get a force that pushing the pipe in any direction you will/can get a leak.. So support the pipe's going thru the uniseal. Juergen |
|
| Author: | PLJ [ Sep 12th, '12, 16:02 ] |
| Post subject: | Re: Uniseal Vendors |
SnowT wrote: Hey, a Very important fact with uniseals.. Also, the pipe doesn't have to enter the uniseal perpendicularly - it can be on an angle up to 15deg, which can be a very handy margin for error.
|
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|