I want to remove this bolt. Anyone know if i can buy this from bunnings?
| Attachments: |
|
star.jpg [ 60.33 KiB | Viewed 1828 times ] |
| Backyard Aquaponics http://byap.backyardmagazines.com/forum/ |
|
| What attachment do i need? http://byap.backyardmagazines.com/forum/viewtopic.php?f=8&t=13610 |
Page 1 of 1 |
| Author: | Zman [ Sep 10th, '12, 15:14 ] | ||
| Post subject: | What attachment do i need? | ||
I want to remove this bolt. Anyone know if i can buy this from bunnings?
|
|||
| Author: | jbobgray [ Sep 10th, '12, 15:21 ] |
| Post subject: | Re: What attachment do i need? |
Hello. Sure can thats where I purchased mine. |
|
| Author: | arbe [ Sep 10th, '12, 15:29 ] |
| Post subject: | Re: What attachment do i need? |
You need something with a torx head. I got some with a cheap drill bit set purchased from B. |
|
| Author: | Charlie [ Sep 10th, '12, 15:31 ] |
| Post subject: | Re: What attachment do i need? |
You can also use a blade bit or flat blade screw driver as the star sections are oposite to each other. I did that after I broke my torx bit on a rusted out one. |
|
| Author: | Lyndon346 [ Sep 10th, '12, 15:39 ] |
| Post subject: | Re: What attachment do i need? |
I think it might be a "T30" bit? |
|
| Author: | RupertofOZ [ Sep 10th, '12, 15:44 ] |
| Post subject: | Re: What attachment do i need? |
A standard "allen key"... will do the job... you can get a cheap set at Bunnings for next to nothing... Actually... I think I unscrewed mine with the "bit" that came with some decking screws... |
|
| Author: | Zman [ Sep 10th, '12, 19:44 ] |
| Post subject: | Re: What attachment do i need? |
Thanks guys, i will get down to bunnings tomorrow then 
|
|
| Author: | mantis [ Sep 10th, '12, 19:47 ] |
| Post subject: | Re: What attachment do i need? |
Yeah, I found a bit in a cheap set that came with a cheap drill. |
|
| Author: | keith [ Sep 11th, '12, 06:43 ] |
| Post subject: | Re: What attachment do i need? |
last few times i bought deck screws, they came with what looked like a proprietary bit/head.. sucked when i lost the bit |
|
| Author: | CLM1981 [ Sep 11th, '12, 07:00 ] |
| Post subject: | Re: What attachment do i need? |
If that is a post in the center of the star then it's a form of security bolt. The star's on the IBC totes are T-45 for the ones I have used. search for Torx T-45 Security Bit. Though without seeing it I can't be sure of the size. A tool like this.  Credit: http://hickorytrailerparts.com |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|