Backyard Aquaponics
http://byap.backyardmagazines.com/forum/

Not only by AP
http://byap.backyardmagazines.com/forum/viewtopic.php?f=5&t=10145		 Page 1 of 1
Author:  Steve S [ Jul 23rd, '11, 20:25 ]
Post subject:  Not only by AP
It’s over 12 years that we extended the house.
With the old kitchen demolished I made a new one, with chipboards, Lauan ply for veneer and lots of glue
and elbow grease.

The ball bearing drawer runners that I could find at that time now started falling apart
so had to replace them, and did it with a much sturdier ones.

Being much bigger and the original ones embedded in the drawers I had to recut recesses to fit them in.
Just finished and pretty happy with it.
And my DW does have another project lined up but I’m not exactly in a hurry to start it.

On earlier projects, where needed I would use a free version of Turbo CAD but its not free any more
and except for some time limited demos there’s not a decent free Autocad clone.
Did find a good and free CAD but very different, makes me feel like an idiot.
It’s Siemens’ solidedge/free2d
Must register to download.

Attachments:
P1050560 (Custom).JPG
P1050560 (Custom).JPG [ 78.28 KiB | Viewed 2703 times ]
P1050558 (Custom).JPG
P1050558 (Custom).JPG [ 85.91 KiB | Viewed 2703 times ]
P1050561 (Custom).JPG
P1050561 (Custom).JPG [ 72.76 KiB | Viewed 2703 times ]
Author:  earthbound [ Jul 24th, '11, 13:26 ]
Post subject:  Re: Not only by AP
Nice work SS, not often you see someone making their own kitchen.. Still just goes to show you, you're drawers are holding up ok, it's the pre-manufactured bits that didn't last.. :thumbright:
Author:  Steve S [ Sep 8th, '11, 20:00 ]
Post subject:  Re: Not only by AP
Another project finished, to my DW satisfaction.

No chipboard this time but cheap 12 mm structural ply, C/D sides grades, HW mouldings and lots of glue
and leftover of timber floor varnish to finish it off.

One side of the ply was quite good, with only a bit of very fine sanding needed but the D side needed a lot of sanding
to make it acceptable.

Attachments:
File comment: Only two more mouldings left to glue on.
P1050563 (Custom).JPG
P1050563 (Custom).JPG [ 52.43 KiB | Viewed 2582 times ]
File comment: And it’s finished.
P1050567 (Custom).JPG
P1050567 (Custom).JPG [ 46.22 KiB | Viewed 2582 times ]
Author:  faye [ Sep 8th, '11, 20:07 ]
Post subject:  Re: Not only by AP
Very noice craftsmanship there Steve, no wonder the DW is pleased with you :)
Author:  mantis [ Sep 8th, '11, 20:18 ]
Post subject:  Re: Not only by AP
Very noice, can you come build me a bar in me shed :drunken:
Author:  red beard [ Sep 8th, '11, 22:05 ]
Post subject:  Re: Not only by AP
you can now go to springvale and go for a 2k walk around that big new store if you dont want to build any more stuff
steve I grew up in Dandy north we lived and played footy and cricket on mcfees rd we went back there in 2008/9 first time for about 20 years it's changed a bit we allways had to chase cows out of our front yard and now its all houses
Author:  Steve S [ Sep 13th, '11, 20:41 ]
Post subject:  Re: Not only by AP
faye wrote:
Very noice craftsmanship there Steve, no wonder the DW is pleased with you :)
Visitor admiring it gave me a funny look when I told her that she should see the beautiful things
Salvos have on special.

In a shed mantis :dontknow: There shouldn’t be a space left for a mouse to hide from your cat.
Did you get it yesterday?

Been to that store last Sunday RB, its huge but most of the things on offer are not exactly to my liking.
Not expensive but do look cheep and flimsy.
Worked on Mulgrave freeway for three months in ’73 when I arrived here.
Albion Reed had dispatch office and machinery depot behind the cemetery somewhere
where’s the shopping centre now. Did look very different then.

Had problems with the PC’s second of the three HDs. Bad sectors.
But now, ignoring that drive, it boots without freezing in the process.
Decided to replace both, C & that D HD to start clean when I get the time for it.
Wit everything B/Upped regularly on a forth portable I should be OK.
Author:  Steve S [ Oct 26th, '11, 20:13 ]
Post subject:  Re: Not only by AP
Been a while, had to deal with couple of issues, first the PC, two of its three drives,
C, getting much too cluttered and slow without a clean OS reinstall for over two years,
and D (Data) with corrupted sectors stalling nearly every boot.
With everything regularly backed up on the external (4th) HD, (the third is Photo/Video drive),
got in two decent size HDs, 1Tb each and a two port serial (RS232) card as well.
After matching the ports, my picaxe protoboards connected at first try.
Will make life easier now.

Nearly finished reinstalling everything needed when hit by the TIA,
(and I don’t mean “Auntie” in Spanish).
Not as bad as one of the medications that nearly bowled me over.
A weak later another trip with the ambos and this time a less effective poison prescribed makes the life more enjoyable.

Lots of new stuff everywhere, will not even try to catch up.
Didn’t get back to the “Electronics 101” forum since first picaxe landed in aus and now found it here.
Where is BYAP heading?
But would recommend PICAXE to everybody, programming it is certainly more fun than Sudoku.
Cheers, Steve S.
Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/