Backyard Aquaponics
http://byap.backyardmagazines.com/forum/

Introduction
http://byap.backyardmagazines.com/forum/viewtopic.php?f=45&t=27180
Page 1 of 1

Author:  Mrginoz [ May 8th, '16, 10:54 ]
Post subject:  Introduction

Hi from Adelaide,
I've been an avid reader for a year & figured it's about time to make it official.
I have a two ft four grow bed Ibc set up. Been running for a year.
Currently have 15 trout & 50 sp fingerlings.
3000ltr per hour at 2m height pump in sump. Feeding two Ibc ft through 32mm. Ft gravity feed through 90mm slo reduced to 40mm at gb. Then all returns to sump.
Have just changed to cf & have one floating raft. Great lettuce in the raft.
Next move is to change the gravity feed from the ft & try & lose some angles & reduce the inlet size to 20mm at the gb.

Attachments:
Aqua 2.jpg
Aqua 2.jpg [ 251.16 KiB | Viewed 2186 times ]
aqua 1.jpg
aqua 1.jpg [ 344.9 KiB | Viewed 2186 times ]
Aqua.jpg
Aqua.jpg [ 340.87 KiB | Viewed 2186 times ]

Author:  BuiDoi [ May 9th, '16, 04:52 ]
Post subject:  Re: Introduction

:wave: ... hi to you..

That system is lookin pretty good, but I am uncertain as to where the sump is

Good job for a first attempt, and one that likely won't need.too much change... :cheers:
..

Author:  Mrginoz [ May 9th, '16, 08:39 ]
Post subject:  Re: Introduction

Hi BuiDoi,
I have two St under each pair of GB. One overflows into the other.
After upsizing inflow to 32mm, I am now having a nightmare with balancing the levels in ft. I have ball valves on each ft & GB. Also can divert extra flow into St. I'm finding a 1mm adjustment on any valve throws the whole system out.
Thinking of changing to a chop 2 at the weekend.

Author:  jmcdaniel0 [ May 11th, '16, 09:35 ]
Post subject:  Re: Introduction

Mrginoz wrote:
Hi BuiDoi,
I have two St under each pair of GB. One overflows into the other.
After upsizing inflow to 32mm, I am now having a nightmare with balancing the levels in ft. I have ball valves on each ft & GB. Also can divert extra flow into St. I'm finding a 1mm adjustment on any valve throws the whole system out.
Thinking of changing to a chop 2 at the weekend.



Its looks great to me. Welcome to the forums!

Author:  Mrginoz [ May 11th, '16, 11:34 ]
Post subject:  Re: Introduction

Many thanks. Just needs tweeking.

Sent from my Nexus 5X using Tapatalk

Author:  jmcdaniel0 [ May 11th, '16, 11:47 ]
Post subject:  Re: Introduction

Mrginoz wrote:
Many thanks. Just needs tweeking.

Sent from my Nexus 5X using Tapatalk

Something always needs tweeking lol. Welcome to the world of AP!

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/