⚠️ This forum has been restored as a read-only archive so the knowledge shared by the community over many years remains available. New registrations and posting are disabled.

All times are UTC + 8 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Hi form Perth WA
PostPosted: May 20th, '15, 17:02 
Newbie
Newbie

Joined: May 20th, '15, 16:40
Posts: 12
Gender: Male
Are you human?: I think so
Location: Western Australia Perth hills
Hi everyone,
I am from Waikiki, Perth, Western Aus
My dad and myself started Hydroponics a few Years ago with great success!
Only problem was the cost of nutrient and how quickly we went through it, and the common water changes. So aquaponics seems the go. So I have most of the stuff to set up a medium sized aquaponics system. My aim is to set up 1 grow bed and the 4 small pots we have and in the near future add a few PVC pipe grow tubes.

The one thing I need now to set up the system is a fish tank, so if any one has a round 1000l fish Tank for sale in perth I am interested.

Also a few questions:
I have a 12W pump and was thinking of using this for a circulation pump and using the 90W pump to flood and drain the grow bed, pots and tubes, will this be ok?

Or could I have the 12W pump on constantly and have the water fall into the tank, will this provide enough O2 for the fish?

Thanks in advance, this forum has been a great help so far and still alot more reading to do!
Cheers, jack


Top
 Profile  
Reply with quote  
    Advertisement
 
 Post subject: Re: Hi form Perth WA
PostPosted: May 20th, '15, 21:45 
In need of a life
In need of a life

Joined: Apr 7th, '13, 20:30
Posts: 1664
Gender: Male
Are you human?: Yup
Location: Perth hills.
Hiya Jack, welcome to the forum.
Maybe an IBC may work for you?
Have you read the IBC of Aquaponics yet?


Top
 Profile  
Reply with quote  
 Post subject: Re: Hi form Perth WA
PostPosted: May 21st, '15, 08:23 
Newbie
Newbie

Joined: May 20th, '15, 16:40
Posts: 12
Gender: Male
Are you human?: I think so
Location: Western Australia Perth hills
Hi skeggley, thanks for the reply
I have looked at IBCs one would suit perfectly, but I have a few conditions as it's going in mum's backyard, and she's not a fan of the IBCs


Top
 Profile  
Reply with quote  
 Post subject: Re: Hi form Perth WA
PostPosted: May 21st, '15, 12:09 
Legend Member
Legend Member

Joined: Jan 9th, '13, 22:59
Posts: 520
Gender: Male
Are you human?: YES
Location: Malaysia
@jackb - Hi and welcome to the forum. You can take a look at Iceman's system with the link attached below.

viewtopic.php?f=18&t=23141&hilit=iceman&start=135

Regards


Top
 Profile  
Reply with quote  
 Post subject: Re: Hi form Perth WA
PostPosted: May 21st, '15, 15:27 
In need of a life
In need of a life
User avatar

Joined: Aug 21st, '12, 15:28
Posts: 1601
Location: At my desk
Gender: Male
Are you human?: YES
Location: Coolbellup
do you want a tall 1000L tank or a wide one?

is the 12V a bilge pump or a brushless? Ifs it a bilge I would not bother - they are not rated for continuous duty.

Water circulation and return should provide enough O2 for the fish depending on the stocking density, water turn over and height it falls in from. I have one system with no aeration and that has been running fine for years.


Top
 Profile  
Reply with quote  
 Post subject: Re: Hi form Perth WA
PostPosted: May 21st, '15, 18:05 
Newbie
Newbie

Joined: May 20th, '15, 16:40
Posts: 12
Gender: Male
Are you human?: I think so
Location: Western Australia Perth hills
Thanks for that link Curious.
I'm after a wide 1000l tank Matt.
The pump is 12W, 230V, probably should have said that, it was bound to cause a mixup :shifty:
I also found another pump 21W 1050l/hr, score!! so the water from that will also be feeding back into the tank so I should be fine, Thanks for that info Matt, saves a few $ in terms of an air pump.
I have packed the hydroponics set into the trailer ready for the move tomorrow and setup on the weekend.
Thanks for the help so far


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 8 hours


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

Powered by phpBB® Forum Software © phpBB Group
Portal by phpBB3 Portal © phpBB Türkiye
[ Time : 0.161s | 15 Queries | GZIP : Off ]