Attachment:
DSC_0061.JPG [ 245.21 KiB | Viewed 1117 times ]
| Attachments: |
|
DSC_0064.JPG [ 207.24 KiB | Viewed 1117 times ] |
|
DSC_0063.JPG [ 306.33 KiB | Viewed 1117 times ] |
| Backyard Aquaponics http://byap.backyardmagazines.com/forum/ |
|
| Building my small nft aquaponics http://byap.backyardmagazines.com/forum/viewtopic.php?f=45&t=23240 |
Page 1 of 1 |
| Author: | H2Oagrofarm [ Oct 15th, '14, 00:40 ] | |||
| Post subject: | Building my small nft aquaponics | |||
Attachment: DSC_0061.JPG [ 245.21 KiB | Viewed 1117 times ]
|
||||
| Author: | Colum Black-Byron [ Oct 15th, '14, 08:34 ] |
| Post subject: | Re: Building my small nft aquaponics |
What are you sitting in the holes? I thought most of the little pots were circular? And a hole saw (the sort used for downlights, or holes for doors) is your friend for cutting the hole, I imagine it took ages cutting and burning the way you did. |
|
| Author: | H2Oagrofarm [ Oct 15th, '14, 12:32 ] |
| Post subject: | Re: Building my small nft aquaponics |
yeps it took half day but i managed with what i have as I had to buy a pump which is expensive, i will put the small net pots in it. I am testing it if everything goes ok then i will have to invest in a hole saw and much more convenient material. I have also installed the fittings and the pump. I will get the fishes in 3days.Will post some images so that i can get your advise |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|