| Backyard Aquaponics http://byap.backyardmagazines.com/forum/ |
|
| Looking to buy 3 bell syphon http://byap.backyardmagazines.com/forum/viewtopic.php?f=35&t=21476 |
Page 1 of 1 |
| Author: | sandiegonewb [ Apr 23rd, '14, 13:11 ] |
| Post subject: | Looking to buy 3 bell syphon |
North county san diego text but 760-613-0612 Sent from my SM-T217S using Tapatalk |
|
| Author: | Colum Black-Byron [ Apr 23rd, '14, 17:45 ] |
| Post subject: | Re: Looking to buy 3 bell syphon |
Hi Sandie. They aren't very hard to make. Just a piece of pipe cut to size, an end cap. Put a stand pipe through the GB (through a bulkhead fitting, or uniseal), and put a bend piece under the GB. Look at a few pictures, they aren't hard to make at all. It took me ten minutes a few weeks ago to make two (piped in ready to go). |
|
| Author: | Silverbullet555 [ Apr 23rd, '14, 20:40 ] |
| Post subject: | Re: Looking to buy 3 bell syphon |
Have to agree with column. I made my first one last week and it is doing well. Most siphons take some adjusting to work in the individual tank so you might as well just make it. |
|
| Author: | sandiegonewb [ Apr 24th, '14, 11:06 ] |
| Post subject: | Re: Looking to buy 3 bell syphon |
Links for assembly? Thank u Sent from my SM-T217S using Tapatalk |
|
| Author: | Silverbullet555 [ Apr 24th, '14, 21:06 ] |
| Post subject: | Re: Looking to buy 3 bell syphon |
sandiegonewb wrote: Links for assembly? Thank u Sent from my SM-T217S using Tapatalk Just google bell siphon. There is a guy that has a website with lots of information. Name starts with an a. There is also a PDF out of the university of Hawaii talking siphons. You should see both when you google it. |
|
| Author: | sandiegonewb [ Apr 25th, '14, 00:24 ] |
| Post subject: | Re: Looking to buy 3 bell syphon |
Thanks Sent from my SPH-L900 using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|