| Backyard Aquaponics http://byap.backyardmagazines.com/forum/ |
|
| R.I.P Goldfish and do it right http://byap.backyardmagazines.com/forum/viewtopic.php?f=29&t=13652 |
Page 1 of 1 |
| Author: | Budgiegrower [ Sep 14th, '12, 08:15 ] |
| Post subject: | R.I.P Goldfish and do it right |
Im off and running, yahoo. All of a sudden one of my water pipes to one grow bed stopped flowing and then the other one did the same. I had to take the pipes apart and found bits of two of the fish inside the pipes. I realised that I didnt put a filter or cover over the ends of the pipes that extend down to the bottom of my IBC fishtank. So I had to take both of these out and I bought two caps that I drilled holes in. I was away for two hours. When I came back to the tank to put the pipes back in there were parts of seven of the eight remaining fish floating and dead. I had left the system running and the fish had all committed hurricurri. The moral of my story is, Do it right the first time, dont rush to have a system up and running, R.I.P goldfish and dont give up. ![]() Regards to all Budgiegrower |
|
| Author: | mantis [ Sep 14th, '12, 09:37 ] |
| Post subject: | Re: R.I.P Goldfish and do it right |
Yes these things happen. Please do not buy 100 fingerlings for your system or you will be posting more woes in the near future. Once your system is cycled maybe 25 fingerlings max |
|
| Author: | DrLuke [ Sep 14th, '12, 12:46 ] |
| Post subject: | R.I.P Goldfish and do it right |
+1 I run (im guessing) about half the growbed capacity you have and my system has struggled from time to time with 22 growing trout. Take your stock advice from the "IBC of aquaponics". Look at how many fish they recommend for a single IBC system, then scale it by how many times more growbed volume you have. I'm guess you are at about 4 times more.... this is way less than 100. |
|
| Author: | faye [ Sep 14th, '12, 14:09 ] |
| Post subject: | Re: R.I.P Goldfish and do it right |
Is there any chance of putting up some photos of your system? I suspect that there may be another issue coming in to play. What worries me a little is the "tin bath" there are just some materials they are not compatible with fish I'm afraid. What media are you using, what are the sizes of the growbeds? |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|