Hi All,
The Junior School of where I work at have a sustainability garden (vegie patch). Being an avid AP'er I suggested that an AP system would be great to complement the sustainability 'precinct'.
The site is not ideal, but I believe workable. It is long @ about 7650mm L and narrow at 1030mm W. The building it would go in front of faces North, so it will cop a lot of sun throughout the day.
I was thinking of using colourbond (and have a supplier willing to make a custom set of FT and GB's) and dividing the area into 3, with two GB's @ 2500 mm L and 1 FT @ 2500 L, all at 1030mm W. The system would be a simple Flood and Drain based on a timer.
There are a couple of options as I see it:
1: The GB's would be on stands at each end of the system, with the FT in the middle. The FT would be 800 H and the GB's at 300H.
2: Have the FT at the end with the drain/sump, and the 2 GB's next to each other(end on end) in the middle and the other end.
Due to it being a Junior School, the FT will need a steel cover to stop the kiddies form falling in.
Any suggestions / help gratefully accepted!
Thx.
| Attachments: |
|
File comment: Due North is to the left. Space is 7.65M L and 1.03M W. IMG_1580.jpg [ 106.87 KiB | Viewed 12434 times ] |
|
IMG_1581.jpg [ 97.53 KiB | Viewed 12434 times ] |