Looks like your outta luck KP
| Backyard Aquaponics http://byap.backyardmagazines.com/forum/ |
|
| Help with Uniseals http://byap.backyardmagazines.com/forum/viewtopic.php?f=10&t=8362 |
Page 1 of 1 |
| Author: | KudaPucat [ Oct 15th, '10, 06:11 ] |
| Post subject: | Help with Uniseals |
Hi guys, I have realised today that I only have 2 of the three uniseals I need to get work done this weekend. I have tradies coming over to do work, and I NEED to get these pipes in. I can't seem to source one from anywhere around. I have ordered more from uniseal in QLD, but they wont get here until monday. Does anybody in the neighbourhood have a spare 2" uniseal that I can borrow and replace when my order comes in? |
|
| Author: | KudaPucat [ Oct 15th, '10, 15:18 ] |
| Post subject: | Help with Uniseals |
Anybody?? |
|
| Author: | gnash06 [ Oct 15th, '10, 16:52 ] |
| Post subject: | Re: Help with Uniseals |
Looks like your outta luck KP
|
|
| Author: | earthbound [ Oct 17th, '10, 11:06 ] |
| Post subject: | Re: Help with Uniseals |
We possibly had them here but it just wasn't enough notice.... |
|
| Author: | KudaPucat [ Oct 17th, '10, 17:19 ] |
| Post subject: | Help with Uniseals |
Thanks Joel... I knew it was too late, that's why I was hoping for somebody local. Oh well they'll arrive tomorrow and I'll have to finish this weekend, and get the guys back. |
|
| Author: | Food&Fish [ Oct 18th, '10, 01:01 ] |
| Post subject: | Re: Help with Uniseals |
What are you paying somebody to build your system |
|
| Author: | KudaPucat [ Oct 18th, '10, 06:31 ] |
| Post subject: | Re: Help with Uniseals |
Food&Fish wrote: What are you paying somebody to build your system Ummmmm no, well, sorrta, maybe... just parts... more the landscaping around the system, than the system itself. Why? Need some extra cash Milne? |
|
| Author: | KudaPucat [ Oct 18th, '10, 11:30 ] |
| Post subject: | Help with Uniseals |
Well my uniseals just arrived. I now of course have surplus, so if anybody needs one or two, let me know. |
|
| Author: | Matthew [ Dec 18th, '10, 08:20 ] |
| Post subject: | Re: Help with Uniseals |
G'day all, Could someone please tell me the correct size hole-saw to use on 90mm stormwater pipe uniseal Many thanks Matt |
|
| Author: | KudaPucat [ Dec 18th, '10, 08:44 ] |
| Post subject: | Re: Help with Uniseals |
3" I think. Ring uniseal in QLD They'll email you a data sheet. |
|
| Author: | Food&Fish [ Dec 18th, '10, 11:07 ] | ||||
| Post subject: | Re: Help with Uniseals | ||||
Matthew wrote: G'day all, Could someone please tell me the correct size hole-saw to use on 90mm stormwater pipe uniseal Many thanks Matt Heres the photos from the pm
|
|||||
| Author: | Food&Fish [ Dec 18th, '10, 11:25 ] | ||
| Post subject: | Re: Help with Uniseals | ||
Heres a fitting from bunnings water harvesting section it bolts to ibc/s with selastic of course and takes 90 mm in near the flange and the other end an 90 mm elbow or whatever fits over it when i extend my system by 3000 i will be using a few if these
|
|||
| Author: | KudaPucat [ Dec 18th, '10, 19:28 ] |
| Post subject: | Re: Help with Uniseals |
At $10 bucks each for a uniseal Milne, I just can't be stuffed making a fitting 
|
|
| Author: | KudaPucat [ Dec 18th, '10, 19:33 ] |
| Post subject: | Re: Help with Uniseals |
here's the datasheet. 063_uniseal.pdf A 90mm pipe requires a 3" uniseal and a 4" hole Sorry I misread your question. The answer is a 4 inch holesaw. |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|