Lots of silicone
| Backyard Aquaponics http://byap.backyardmagazines.com/forum/ |
|
| How do you glue stuff in a grow bed or fish tank? http://byap.backyardmagazines.com/forum/viewtopic.php?f=1&t=5330 |
Page 1 of 2 |
| Author: | brandon [ Apr 21st, '09, 04:13 ] |
| Post subject: | How do you glue stuff in a grow bed or fish tank? |
What is a good way to glue something in a hard plastic system? Silicone caulk do the trick? Obviously need something that can be in water and not be toxic. Thanks! |
|
| Author: | Outbackozzie [ Apr 21st, '09, 06:45 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
Lots of silicone
|
|
| Author: | KudaPucat [ Apr 21st, '09, 07:25 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
Be careful not to use bathroom silicon. It contains a fungicide. Roof and Gutter is well used by BYAPers around the world. If allowed to cure before adding water, it has 0 measured effects (so far) |
|
| Author: | Gilly [ Apr 21st, '09, 18:57 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
Kuda, good to hear that. Just used some roof sealant. I was a bit concerned. Not now. What about the PVC glue. The red primer and blue glue/cement for joining pipes. I used them on the pipes connected to the pumps. Waited 24 hours and flushed them throught before use. Will they slowly kill me? 
|
|
| Author: | KudaPucat [ Apr 21st, '09, 19:03 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
never had any problem with that either. Fish are more sensitive than you,as they're smaller. If the fish are fine, so will you be, |
|
| Author: | KudaPucat [ Apr 21st, '09, 19:03 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
generally. |
|
| Author: | Dufflight [ Apr 21st, '09, 19:28 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
|
|
| Author: | Food&Fish [ Apr 21st, '09, 19:29 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
WITH STICKY STUFF |
|
| Author: | DanDMan [ Apr 22nd, '09, 20:56 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
I have found solid connections that can not be bumped off are better becasue if it can come off sooner or later IT WILL and most likely when you are not looking. I use uniseals or bulk head fittings. |
|
| Author: | brandon [ Apr 23rd, '09, 01:49 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
DanDMan wrote: I have found solid connections that can not be bumped off are better becasue if it can come off sooner or later IT WILL and most likely when you are not looking. I use uniseals or bulk head fittings. Aha. Uniseal looks like a great thing. Where do you get these locally? Lowes or home depot have them? Also I found them at Aquatic eco system store and it's saying for 1 1/4" PVC I'd use a 2" hole saw. Is that because the seal takes up enough extra space that I have to go a 1/4" up from what I would use if it was just the pipe? Thanks |
|
| Author: | KudaPucat [ Apr 23rd, '09, 04:43 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
lookup uniseals on the forum. you will see they need a certain amount of rubber so the can expand and seal properly. yes hole size is about 3/4" larger diameter than the pipe size |
|
| Author: | DanDMan [ Apr 24th, '09, 22:41 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
I have had to order them from their website and just recently several of us placed a large order and saved a lot! What size pipes are you needing to use and how many? I might have some extras; depending on size. |
|
| Author: | brandon [ Apr 24th, '09, 22:44 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
DanDMan wrote: I have had to order them from their website and just recently several of us placed a large order and saved a lot! What size pipes are you needing to use and how many? I might have some extras; depending on size. Actually I ended up making my own bulkhead fitting with a tub drain gasket and some sch 80 pvc fittings from lowes. Seems to work pretty well. I'm using 1 1/4" pipe |
|
| Author: | DanDMan [ Apr 24th, '09, 22:46 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
Sounds like you have it under control then. If you ever do try a uniseal you will be spoiled! |
|
| Author: | brandon [ Apr 24th, '09, 22:52 ] |
| Post subject: | Re: How do you glue stuff in a grow bed or fish tank? |
DanDMan wrote: Sounds like you have it under control then. If you ever do try a uniseal you will be spoiled! GAH!! Ok I'm going to try it out heh. I was too impatient to order them, but the bulkheads allow me to play until the uniseals get here. I like to be spoiled. |
|
| Page 1 of 2 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|