| Backyard Aquaponics http://byap.backyardmagazines.com/forum/ |
|
| Portable demo systems http://byap.backyardmagazines.com/forum/viewtopic.php?f=1&t=4476 |
Page 1 of 1 |
| Author: | swanberg [ Nov 14th, '08, 02:38 ] |
| Post subject: | Portable demo systems |
In a few months I'm going to give a talk/demo on AP for a local sustainability fair. I need to build a portable system, that one reasonably strong woman with a cart can move relatively safely. I would also like to make it attractive, so as to not turn off people. I'm not terribly into the wheelie bin systems, but I think that may be the best way to go. Any ideas? I've searched around here, but a lot of the pics and vids of earlier portable posts are gone. I'm a decent scavenger, and have decent resources. Frex, I'll probably use hydroton to lessen the weight. I'd like to build it somewhat soon, so it can be cycled and producing (greens) by the time of the fair. |
|
| Author: | swanberg [ Nov 14th, '08, 02:46 ] |
| Post subject: | Re: Portable demo systems |
I know beggars can't be choosers, but I'd prefer to make it a growbed-based flood and drain (and hopefully CHIFT-PIST). Mainly, I don't want it to look like a hydroponic system. |
|
| Author: | Dave Donley [ Nov 14th, '08, 03:05 ] |
| Post subject: | Re: Portable demo systems |
viewtopic.php?p=125119#p125119 |
|
| Author: | swanberg [ Nov 14th, '08, 03:10 ] |
| Post subject: | Re: Portable demo systems |
This is portable? Just kidding. I've seen that setup, and think it's pretty neat. I'm hoping to use plastic and things with lids, though. I'll look through that thread again, thanks for the reminder! And, your new icon is very pretty (I've been gone for awhile, if it's not 'new.') |
|
| Author: | Dave Donley [ Nov 14th, '08, 03:56 ] | ||
| Post subject: | Re: Portable demo systems | ||
I somehow lost my other reply. Lowe's has 15 gallon mortar mixing tubs for about $12 (in the cement area), and 20 gallon round planters for about $20 that are very nice too. I used those in my first system and am still using them for stuff. http://www.lowes.com/lowes/lkn?action=p ... lpage=none http://www.lowes.com/lowes/lkn?action=p ... lpage=none They way I make simple AP systems now
|
|||
| Author: | TCLynx [ Nov 14th, '08, 03:57 ] |
| Post subject: | Re: Portable demo systems |
It might not be pretty as is, but my aquarium system uses 5 gallon buckets as grow beds. With different plumbing fittings, they could reasonably be dismantled enough to move and set back up. A 5 gallon bucket full of gravel is quite heavy but I can move one if I'm not having to carry it far. Anyway, a few (between 1 and 4) 5 gallon buckets (perhaps dressed up to look pretty) and a couple 10 gallon aquarium (one as fish tank and the other as sump tank with pump) could work well as a demo system I think. The 5 gallon buckets (or perhaps 1, 2 or 3 gallon would work depending on what food buckets you can pick up free from the market or bakery) would stand up better to being moved repeatedly than most storage bins I know of. Here is a link to my aquarium system thread http://backyardaquaponics.com/forum/viewtopic.php?f=18&t=3628 I do know there is another member that made a demo system with a couple 10 gallon aquarium and a goldfish. I think perhaps somewhere down that thread linked to earlier is mention and perhaps even pictures of that aquarium demo system. |
|
| Author: | Dave Donley [ Nov 14th, '08, 03:59 ] |
| Post subject: | Re: Portable demo systems |
(A no holes overflow may be easier than putting a hole in the side of a round fish tub) |
|
| Author: | Dave Donley [ Nov 14th, '08, 04:04 ] |
| Post subject: | Re: Portable demo systems |
BTW that was me, and I got the gravel-filled sump idea from TC! |
|
| Author: | TCLynx [ Nov 14th, '08, 04:13 ] |
| Post subject: | Re: Portable demo systems |
I do still like flood and drain for the grow beds myself though. As for putting a hole in the side of a round container, so long as the container isn't super thick, a uniseal will work fine, no need to worry about getting a bulkhead to seal on the curved container. Uniseals are inexpensive too. Now I do like the no holes overflows for the aquarium when one does not want to fiddle with cutting holes in glass or something. Just need to check the no holes overflows regularly to keep them properly primed. I've had one of those little suck valves (the air pump check valve) go bad not long ago causing one of my no holes overflows to stop working. |
|
| Author: | Outbackozzie [ Nov 14th, '08, 16:17 ] |
| Post subject: | Re: Portable demo systems |
+1 for DD's. |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|