Backyard Aquaponics
http://byap.backyardmagazines.com/forum/

Greenwater turnaround, allot of Pics. and some gunk??
http://byap.backyardmagazines.com/forum/viewtopic.php?f=1&t=3940
Page 1 of 1

Author:  Newbie [ Aug 9th, '08, 00:52 ]
Post subject:  Greenwater turnaround, allot of Pics. and some gunk??

Ok I had posted about my green water, my system has cycled I think. Water has cleard, some plants growing but I have allot of gunk build up in the upper dump tank. This only my starter barrelponic system. I have 9 bream or sun pearch, have some tomatoe seeds up, collards and two different types of lettuce growing. My wife likes to over do it on the seed planting and I will have to thin allot of them out I am sure.
My water readings today were ph=7.6, Ammonia= between 0-0.25ppm, Nitrite= 4-5 ppm and Nitrate= ~5.0ppm. Fish seem to be doing ok, have been real slow on feeding them. First of all they came out of my pond that is for catfish, I feed the catfish with floating catfish feed, so I have been putting that in as feed in my barrels. The bream wont eat it until is has time to soak and get soggy. I have taken some pictures of the dump barrel (sorry for the quality) and it has alge built up and also some brown gunk on the bottom. My wife thinks it might be uneaten fish food, but I am not sure....any thoughts on the gunk?

Attachments:
File comment: The Gunk
MyBarrelPonics 006.jpg
MyBarrelPonics 006.jpg [ 111.81 KiB | Viewed 2452 times ]
File comment: Mysystem2
MyBarrelPonics 005.jpg
MyBarrelPonics 005.jpg [ 135.26 KiB | Viewed 2455 times ]
File comment: My system 1
MyBarrelPonics 002.jpg
MyBarrelPonics 002.jpg [ 159.96 KiB | Viewed 2451 times ]

Author:  Newbie [ Aug 9th, '08, 00:56 ]
Post subject:  Re: Greenwater turnaround, allot of Pics. and some gunk??

Adding the rest of my pictures

Attachments:
File comment: Water Readings
MyBarrelPonics 024.jpg
MyBarrelPonics 024.jpg [ 94.24 KiB | Viewed 2442 times ]
File comment: Gunk part 2
MyBarrelPonics 023.jpg
MyBarrelPonics 023.jpg [ 128.09 KiB | Viewed 2438 times ]

Author:  Newbie [ Aug 9th, '08, 01:00 ]
Post subject:  Re: Greenwater turnaround, allot of Pics. and some gunk??

And the last of them....some plants.

Attachments:
File comment: Lettuce
MyBarrelPonics 012.jpg
MyBarrelPonics 012.jpg [ 142.46 KiB | Viewed 2439 times ]
File comment: plants
MyBarrelPonics 010.jpg
MyBarrelPonics 010.jpg [ 187.09 KiB | Viewed 2435 times ]
File comment: Tomatoe
MyBarrelPonics 009.jpg
MyBarrelPonics 009.jpg [ 181.17 KiB | Viewed 2439 times ]

Author:  GotFish? [ Aug 9th, '08, 01:25 ]
Post subject:  Re: Greenwater turnaround, allot of Pics. and some gunk??

Great way to keep those barrel halves from bowing out. I agree you may have to thin some plants out :) , Not sure about the gunk a mixture of algea and fish food?
Nice.

Author:  TCLynx [ Aug 9th, '08, 01:36 ]
Post subject:  Re: Greenwater turnaround, allot of Pics. and some gunk??

Your Nitrite reading is still really high, looks like you are not completely cycled yet. To be cycled you want both ammonia and nitrite to be close to 0 if not definitely 0. Nitrate is the only reading you want to be much above 0.

With Nitrite readings that High, I would be either doing water changes or adding salt or both.

The gunk is probably a combination of uneaten food, fish poo, and dead algae. To help get it into the grow beds you might want to occasionally dump an extra bucket of water into the dump tank right as it is dumping or perhaps use the hose to spray the gunk around as the tank is dumping to help move it into the grow beds. Not too big a deal until you notice an odor from it, then it is a bad thing. I don't get too much trouble with gunk in my flush tank because I turned the "top tank" on the barrel system into a media filled flood and drain grow bed to catch the gunk. It doesn't look like you have a top bed/tank at all.

Author:  Newbie [ Aug 9th, '08, 03:49 ]
Post subject:  Re: Greenwater turnaround, allot of Pics. and some gunk??

I have a top bed, but I have it pulled out right now. If you look at the whole system picture you can see that the pvc goes up higher, I put a T in so I could pull that top system until I get things lined out. I like your idea though, I might put in another bell siphon into the top bed, add some gravel and put it back into the system. I actually have it rather high and my wife would never be able to reach the top :drunken:
I was going to siphon the "gunk" out, do you think I should let it hit the grow bed media?

Thanks

Author:  TCLynx [ Aug 9th, '08, 04:57 ]
Post subject:  Re: Greenwater turnaround, allot of Pics. and some gunk??

Gunk (the solids) are generally good in the grow beds so long as they don't get to be too much (too much is when you are highly overstocked for your grow bed capacity.)

I have an old set of pool steps behind my barrel system that we use to climb up and tend the top bed.

Author:  RupertofOZ [ Aug 9th, '08, 07:56 ]
Post subject:  Re: Greenwater turnaround, allot of Pics. and some gunk??

Newbie wrote:
my system has cycled I think.


+1 to what TCL said.... you're not quite cycled yet by the look of your nitrite reading... and your nitrates are still (relatively) low....

When the nitrite drops to zero and your nitrates climb.... your plants will show a growth spurt... and your "gunk" will probably disappear, and your water clear...

I'd be concerned about your nitrite level... and salt as TCL suggested ....

Author:  Newbie [ Aug 10th, '08, 02:22 ]
Post subject:  Re: Greenwater turnaround, allot of Pics. and some gunk??

We are talking normal table salt?

Author:  TCLynx [ Aug 10th, '08, 02:53 ]
Post subject:  Re: Greenwater turnaround, allot of Pics. and some gunk??

Sodium chloride, yes table salt, be sure to get the non iodized stuff. Water softener salt (the plain solar stuff not the pelletized stuff) will work too same with swimming pool salt. I found the plain water softener salt to be the cheapest at the grocery store. It does take more work to disolve it though. You want to disolve the salt in water before adding it into the system. Salt crystals on the bottom of the fish tank can burn the fish.

There is info on the forum about the amount of salt per amount of water and the ppm of the nitrites. 3 ppt of salt is generally safe for most plants. Look in the useful info section for a thread on salting for fish health. I believe I was figuring out how many pounds of salt would be needed per 100 gallons of water. So much easier for those dealing with the metric system.

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/