| Backyard Aquaponics http://byap.backyardmagazines.com/forum/ |
|
| Cleaning algae off of Lexan HELP! http://byap.backyardmagazines.com/forum/viewtopic.php?f=1&t=31639 |
Page 1 of 1 |
| Author: | steve@f2spc.org [ Jun 30th, '21, 03:52 ] |
| Post subject: | Cleaning algae off of Lexan HELP! |
HI Folks- Could not find any posts with this problem. I recently replaced my tank window due to scratches and baked on algae. In three short weeks, my new window has a ton of algae which I cannot get off with a rag. Concerned about using magnet cleaners as I don't want to scratch new glass. How do I clean algae off of lexan in a functioning AP system? I have used cotton towels to no avail. Thank you. Steve |
|
| Author: | dstjohn99 [ Jul 1st, '21, 23:12 ] |
| Post subject: | Re: Cleaning algae off of Lexan HELP! |
1, get a pleco 2, I use aquarium filter pads (the blue / white material or similar) to scrub my acrylic tank inside. It may create a dull haze over time, but I have not noticed a problem yet after 3 years. Also, easier to see through slightly hazed clear acrylic than algae. |
|
| Author: | steve@f2spc.org [ Jul 1st, '21, 23:36 ] |
| Post subject: | Re: Cleaning algae off of Lexan HELP! |
Thank you dstjohn99!!! We were in fact considering a pleco! |
|
| Author: | dstjohn99 [ Jul 2nd, '21, 01:51 ] |
| Post subject: | Re: Cleaning algae off of Lexan HELP! |
steve@f2spc.org wrote: Thank you dstjohn99!!! We were in fact considering a pleco! You are welcome. I have cannister style filters like the Penn-Plax Cascade. I think the filter pads or foam pads from those would work well also and be safe for the acrylic. I just did a quick Google of how to clean algae from an acrylic aquarium and a few products from Petco popped up, including a squeegee looking scraper and a filter pad like I suggested. |
|
| Author: | steve@f2spc.org [ Jul 3rd, '21, 00:08 ] |
| Post subject: | Re: Cleaning algae off of Lexan HELP! |
interesting. my google of a nearly exact phrase was totally unhelpful other than this forum popping up! Thanks again for your advice. Steve |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|