| Backyard Aquaponics http://byap.backyardmagazines.com/forum/ |
|
| Help me - stuck on Valve Actuator setup http://byap.backyardmagazines.com/forum/viewtopic.php?f=1&t=30520 |
Page 1 of 1 |
| Author: | tgmitchell [ May 31st, '19, 17:17 ] |
| Post subject: | Help me - stuck on Valve Actuator setup |
HI, I have a 7000l tank with a hi-flow pump. I am trying to set up a 3 way Jandy valve with an Astrapool Valve actuator, an Ironcore 24v Transformer and a Muli-timer - to creat a ebb and flow system without turning off the pump. Problem is that to turn the other way the actuator has a polarising switch - so all good turning one way but then it has to be flipped to turn it the other. Anyone have experience with something like this? Am I just using the wrong Actuator, do I need to bypass the polarising switch somehow? |
|
| Author: | scotty435 [ Jun 1st, '19, 06:20 ] |
| Post subject: | Re: Help me - stuck on Valve Actuator setup |
I'm not sure about this but you might want to PM TCLynx and see if she knows anything about this. For awhile there she was selling actuators (indexing valves in this case) designed to switch flow between grow beds. She has a website of her own and you might find something along these lines posted there - http://www.aquaponiclynx.com/ |
|
| Page 1 of 1 | All times are UTC + 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|