⚠️ This forum has been restored as a read-only archive so the knowledge shared by the community over many years remains available.
New registrations and posting are disabled.
View unanswered posts | View active topics
It is currently Mar 17th, '26, 00:49
| Image taken on: |
Mar 14th, '11, 17:54 |
| Focus length: |
6 mm |
| Shutter speed: |
1/60 Sec |
| F-number: |
F/3 |
| Flash: |
Flash fired, auto mode |
| Camera-model: |
KODAK LS753 ZOOM DIGITAL CAMERA |
| Exposure program: |
Normal program |
| Exposure bias: |
0 EV |
| Metering mode: |
Pattern |
| Author |
Comments |
|
arbe
|
 Posted: Aug 18th, '11, 21:11 |
|
| Moderator |
 |
 |
Joined: Jun 26th, '10, 20:46
Posts: 2938
|
|
Each growbed uses the BYAP delivery method. That is a 'ring' of pipe around the edge with 8mm holes drilled underneath.
Not all holes have water flowing out of mine, but if some get blocked up with solids the others will allow water to flow out of them. Over time the blockages should resolve themselves.
The more I open up the flow to the growbed, the more holes which have water flowing from them.
|
|
|
|
 |
|
Backyard Aquaponics